Turkish 12 Digit Hs Codes
Under Chapter  39

39.01 Polymers of ethylene, in primary forms:

3901.10 - Polyethylene having a specific gravity of less than 0,94:
3901.10.10.00.00 - - Linear polyethylene
- - Other
3901.10.90.00.11 - - - Low density polyethylene
3901.10.90.00.12 - - - Polyethylene compounds
3901.10.90.00.19 - - - Other
3901.20 - Polyethylene having a specific gravity of 0,94 or more:
3901.20.10.00.00 - - Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing:- 50 mg/kg or less of aluminium, - 2 mg/kg or less of calcium, - 2 mg/kg or less of chromium, - 2 mg/kg or less of iron, - 2 mg/kg or less of nickel, - 2 mg/kg or less of titanium and - 8 mg/kg or less of vanadium,for the manufacture of chlorosulphonated polyethylene
- - Other
3901.20.90.00.11 - - - High density polyethylene
3901.20.90.00.12 - - - Polyethylene compounds
3901.20.90.00.19 - - - Other
3901.30.00.00.00 - Ethylene-vinyl acetate copolymers
3901.90 - Other:
3901.90.30.00.00 - - Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
- - Other
3901.90.90.00.11 - - - Ethylene propylene copolymer
3901.90.90.00.12 - - - Chloro sulphonated low density polyethylene (including compounds)
3901.90.90.00.19 - - - Other

39.02 Polymers of propylene or of other olefins, in primary forms:

3902.10 - Polypropylene

3902.10.00.00.11 - - Polypropylene compounds
3902.10.00.00.19 - - Other
3902.20.00.00.00 - Polyisobutylene
3902.30 - Propylene copolymers
3902.30.00.00.11 - - Polypropylene copolymer compounds
3902.30.00.00.19 - - Other
3902.90 - Other:
3902.90.10.00.00 - - A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
3902.90.20.00.00 - - Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene, in one of the forms mentioned in note 6(b) to this chapter
3902.90.90.00.00 - - Other

39.03 Polymers of styrene, in primary forms:
- Polystyrene:

3903.11.00.00.00 - - Expansible
3903.19.00.00.00 - - Other
3903.20.00.00.00 - Styrene-acrylonitrile (SAN) copolymers
3903.30.00.00.00 - Acrylonitrile-butadiene-styrene (ABS) copolymers
3903.90 - Other:
3903.90.10.00.00 - - Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more
3903.90.20.00.00 - - Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapter
3903.90.90.00.00 - - Other

39.04 Polymers of vinyl chloride or of other halogenated olefins, in primary forms:

- Poly(vinyl chloride), not mixed with any other substances

3904.10.00.00.11 - - Polyvinyl chloride emulsion (E-PVC)
3904.10.00.00.19 - - Other
- Other poly(vinyl chloride):
3904.21.00.00.00 - - Non-plasticised
3904.22.00.00.00 - - Plasticised
3904.30.00.00.00 - Vinyl chloride-vinyl acetate copolymers
3904.40.00.00.00 - Other vinyl chloride copolymers
3904.50 - Vinylidene chloride polymers:
3904.50.10.00.00 - - Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres
3904.50.90.00.00 - - Other
- Fluoropolymers:
3904.61.00.00.00 - - Polytetrafluoroethylene
3904.69 - - Other:
3904.69.10.00.00 - - - Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapter
3904.69.20.00.00 - - - Fluoroelastomer FKM
3904.69.80.00.00 - - - Other
3904.90.00.00.00 - Other

39.05 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms:
- Poly(vinyl acetate):
3905.12.00.00.00 - - In aqueous dispersion
3905.19.00.00.00 - - Other
- Vinyl acetate copolymers:
3905.21.00.00.00 - - In aqueous dispersion
3905.29.00.00.00 - - Other
3905.30.00.00.00 - Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
- Other
3905.91.00.00.00 - - Copolymers
3905.99 - - Other:
3905.99.10.00.00 - - - Poly(vinyl formal), in one of the forms mentioned in note 6(b) to this chapter, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight:- 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and - 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
3905.99.90.00.00 - - - Other

39.06 Acrylic polymers in primary forms:

3906.10.00.00.00 - Poly(methyl methacrylate)
3906.90 - Other:
3906.90.10.00.00 - - Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
3906.90.20.00.00 - - Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N, N-dimethylacetamide, containing by weight 55 % or more of copolymer
3906.90.30.00.00 - - Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate
3906.90.40.00.00 - - Copolymer of acrylonitrile with methyl acrylate, modified with polybutadieneacrylonitrile (NBR)
3906.90.50.00.00 - - Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
3906.90.60.00.00 - - Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica
3906.90.90.00.00 - - Other

39.07 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms:

3907.10.00.00.00 - Polyacetals
3907.20 - Other polyethers:
- - Polyether alcohols:
3907.20.11.00.00 - - - Polyethylene glycols
3907.20.20.00.00 - - - Other
- - Other:
3907.20.91.00.00 - - - Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide
3907.20.99.00.00 - - - Other
3907.30.00.00.00 - Epoxide resins
3907.40.00.00.00 - Polycarbonates
3907.50.00.00.00 - Alkyd resins
3907.60 - Poly(ethylene terephthalate):
3907.60.20.00.00 - - Having a viscosity number of 78 ml/g or higher
3907.60.80.00.00 - - Other
3907.70.00.00.00 - Poly(lactic acid)
- Other polyesters:
3907.91 - - Unsaturated:
3907.91.10.00.00 - - - Liquid
3907.91.90.00.00 - - - Other
3907.99 - - Other:
3907.99.10.00.00 - - - Poly(ethylene naphthalene-2,6-dicarboxylate)
3907.99.90.00.00 - - - Other

39.08 Polyamides in primary forms:

3908.10 - Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
3908.10.00.00.11 - - Compounds
3908.10.00.00.19 - - Other
3908.90.00.00.00 - Other

39.09 Amino-resins, phenolic resins and polyurethanes, in primary forms:

3909.10.00.00.00 - Urea resins; thiourea resins
3909.20.00.00.00 - Melamine resins
3909.30.00.00.00 - Other amino-resins
3909.40.00.00.00 - Phenolic resins
3909.50 - Polyurethanes:
3909.50.10.00.00 - - Polyurethane of 2,2'-(tert-butylimino)diethanol and 4,4'-methylenedicyclohexyl diisocyanate, in the form of a solution in N, N-dimethylacetamide, containing by weight 50 % or more of polymer
3909.50.90.00.00 - - Other

3910.00 Silicones in primary forms

3910.00.00.00.11 - Silicone oils
3910.00.00.00.12 - Dispersion, emulsion, suspension and solvents
3910.00.00.00.19 - Other

39.11 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms:
3911.10.00.00.00 - Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
3911.90 - Other:
- - Condensation or rearrangement polymerisation products whether or not chemically modified:
3911.90.11.00.00 - - - Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4- phenylene), in one of the forms mentioned in note 6(b) to this chapter
3911.90.13.00.00 - - - Poly(thio-1,4-phenylene)
3911.90.19.00.00 - - - Other
- - Other:
3911.90.92.00.00 - - - Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50 % or more of polymer; hydrogenated copolymers of vinyltoluene and ?-methylstyrene
3911.90.99.00.00 - - - Other

39.12 Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms:
- Cellulose acetates:
3912.11.00.00.00 - - Non-plasticised
3912.12.00.00.00 - - Plasticised
3912.20 - Cellulose nitrates (including collodions):
- - Non-plasticised:
- - - Collodions and celloidin
3912.20.11.00.11 - - - - Retted or alcohol having less than 12,6% and more than 25% nitrade
3912.20.11.00.19 - - - - Other
- - - Other
3912.20.19.00.11 - - - - Retted or alcohol having less than 12,6% and more than 25% nitrade
3912.20.19.00.19 - - - - Other
3912.20.90.00.00 - - Plasticised
- Cellulose ethers:
3912.31.00.00.00 - - Carboxymethylcellulose and its salts
3912.39 - - Other:
3912.39.20.00.00 - - - Hydroxypropylcellulose
3912.39.85.00.00 - - - Other
3912.90 - Other:
3912.90.10.00.00 - - Cellulose esters
3912.90.90.00.00 - - Other

39.13 Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms:

3913.10.00.00.00 - Alginic acid, its salts and esters
3913.90 - Other
3913.90.00.10.00 - - Dextran (a)
3913.90.00.20.00 - - Chemical derivatives of natural rubber
3913.90.00.90.00 - - Other

3914.00.00.00.00 Ion-exchangers based on polymers of headings 3901 to 3913, in primary form

39.15 Waste, parings and scrap, of plastics:

3915.10.00.00.00 - Of polymers of ethylene
3915.20.00.00.00 - Of polymers of styrene
3915.30.00.00.00 - Of polymers of vinyl chloride
3915.90 - Of other plastics:
- - Of polymers of propylene:
3915.90.11.10.00 - - - Of addition polymerisation products
3915.90.11.90.00 - - - Other
- - Other:
3915.90.80.00.11 - - - Of Polyethylene-Terephthalate (PET)
3915.90.80.00.19 - - - Other

39.16 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics:

3916.10.00.00.00 - Of polymers of ethylene
3916.20.00.00.00 - Of polymers of vinyl chloride
3916.90 - Of other plastics:
- - Of condensation or rearrangement polymerisation products, whether or not chemically modified:
3916.90.10.00.11 - - - Of phenoplasts
3916.90.10.00.12 - - - Of polyurethanes
3916.90.10.00.19 - - - Other
- - Of addition polymerisation products:
3916.90.50.00.11 - - - Of Acrylic and metacrylic polymers, akrylmetakrylic copolymers
3916.90.50.00.12 - - - Of Polytetraphlorethylene
3916.90.50.00.19 - - - Other
3916.90.90.00.00 - - Other

39.17 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics:

3917.10 - Artificial guts (sausage casings) of hardened protein or of cellulosic materials:
3917.10.10.00.00 - - Of hardened protein
3917.10.90.00.00 - - Of cellulosic materials
- Tubes, pipes and hoses, rigid:
3917.21 - - Of polymers of ethylene:
3917.21.10.00.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.21.90.00.00 - - - Other
3917.22 - - Of polymers of propylene:
3917.22.10.00.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.22.90.00.00 - - - Other
3917.23 - - Of polymers of vinyl chloride:
3917.23.10.00.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.23.90.00.00 - - - Other
3917.29 - - Of other plastics:
3917.29.00.10.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.29.00.20.00 - - - With fittings attached, for use in civil aircraft
3917.29.00.30.00 - - - Sewed pipes
3917.29.00.40.00 - - - Of hardened proteins, natural hard rubber' chemical derivatives
3917.29.00.90.00 - - - Other
- Other tubes, pipes and hoses:
3917.31 - - Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 Mpa
3917.31.00.10.00 - - - With fittings attached, for use in civil aircraft
3917.31.00.20.00 - - - Air channels
3917.31.00.80.00 - - - Other
3917.32 - - Other, not reinforced or otherwise combined with other materials, without fittings:
3917.32.00.10.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.32.00.20.00 - - - Artificial sausage casings
3917.32.00.30.00 - - - Sewed pipes
3917.32.00.40.00 - - - Air channels
3917.32.00.80.00 - - - Other
3917.33.00.00.00 - - Other, not reinforced or otherwise combined with other materials, with fittings
3917.39 - - Other:
3917.39.00.10.00 - - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.39.00.20.00 - - - With fittings attached, for use in civil aircraft
3917.39.00.30.00 - - - Sewed pipes
3917.39.00.40.00 - - - Air channels
3917.39.00.80.00 - - - Other
3917.40 - Fittings
3917.40.00.00.11 - - Hard polyvinyl chloride pipe fittings (for pressured pipes)
3917.40.00.00.12 - - Fittings for Polyvinyl chloride flexible pipes used at internal electrical installations
3917.40.00.00.19 - - Other

39.18 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter:

3918.10 - Of polymers of vinyl chloride:
- - Consisting of a support impregnated, coated or covered with poly(vinyl chloride)
3918.10.10.00.11 - - - PVC floor coverings
3918.10.10.00.12 - - - PVC wall or ceiling coverings
- - Other
3918.10.90.00.11 - - - Of a thickness not exceeding 5 mm
3918.10.90.00.19 - - - Other
3918.90 - Of other plastics
3918.90.00.00.11 - - Tiles of polystyrene for interior wall and ceiling
3918.90.00.00.19 - - Other

39.19 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, ofplastics, whether or not in rolls:

3919.10 - In rolls of a width not exceeding 20 cm:
- - Strips, the coating of which consists of unvulcanised natural or synthetic rubber:
3919.10.12.00.00 - - - Of poly(vinyl chloride) or of polyethylene
3919.10.15.00.00 - - - Of polypropylene
3919.10.19.00.00 - - - Other
- - Other
3919.10.80.10.00 - - - Of condensation or rearrangement polymerisation products, whether or not chemically modified
3919.10.80.20.00 - - - Of addition polymerisation products
3919.10.80.90.00 - - - Other
- Other
3919.90.00.10.00 - - Further worked than surface-worked, or cut to shapes other than rectangular (including square)
3919.90.00.20.00 - - Of condensation or rearrangement polymerisation products, whether or not chemically modified
3919.90.00.30.00 - - Of addition polymerisation products
3919.90.00.90.00 - - Other

39.20 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials:

3920.10 - Of polymers of ethylene:
- - Of a thickness not exceeding 0,125 mm:
- - - Of polyethylene having a specific gravity of:
- - - - Less than 0,94:
3920.10.23.00.00 - - - - - Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
3920.10.24.00.00 - - - - - Stretch film, not printed
3920.10.25.00.00 - - - - - Other
3920.10.28.00.00 - - - - 0,94 or more
3920.10.40.00.00 - - - Other
- - Of a thickness exceeding 0,125 mm:
3920.10.81.00.00 - - - Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent
3920.10.89.00.00 - - - Other
3920.20 - Of polymers of propylene:
- - Of a thickness not exceeding 0,10 mm:
- - - Biaxially oriented
3920.20.21.00.11 - - - - Printed
3920.20.21.00.19 - - - - Other
3920.20.29.00.00 - - - Other
3920.20.80.00.00 - - Of a thickness exceeding 0,10 mm
3920.30.00.00.00 - Of polymers of styrene
- Of polymers of vinyl chloride:
3920.43 - - Containing by weight not less than 6 % of plasticisers:
3920.43.10.00.00 - - - Of a thickness not exceeding 1 mm
3920.43.90.00.00 - - - Of a thickness exceeding 1 mm
3920.49 - - Other:
3920.49.10.00.00 - - - Of a thickness not exceeding 1 mm
3920.49.90.00.00 - - - Of a thickness exceeding 1 mm
- Of acrylic polymers:
3920.51.00.00.00 - - Of poly(methyl methacrylate)
3920.59 - - Other:
3920.59.10.00.00 - - - Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres
3920.59.90.00.00 - - - Other
- Of polycarbonates, alkyd resins, polyallyl esters or other polyesters:
3920.61.00.00.00 - - Of polycarbonates
3920.62 - - Of poly(ethylene terephthalate):
- - - Of a thickness not exceeding 0,35 mm:
3920.62.12.00.00 - - - - Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates
3920.62.19.00.00 - - - - Other
3920.62.90.00.00 - - - Of a thickness exceeding 0,35 mm
3920.63.00.00.00 - - Of unsaturated polyesters
3920.69.00.00.00 - - Of other polyesters
- Of cellulose or its chemical derivatives:
3920.71.00.00.00 - - Of regenerated cellulose
3920.73 - - Of cellulose acetate:
3920.73.10.00.00 - - - Film in rolls or in strips, for cinematography or photography
3920.73.80.00.00 - - - Other
3920.79 - - Of other cellulose derivatives:
3920.79.10.00.00 - - - Of vulcanised fibre
3920.79.90.00.00 - - - Other
- Of other plastics:
3920.91.00.00.00 - - Of poly(vinyl butyral)
3920.92.00.00.00 - - Of polyamides
3920.93.00.00.00 - - Of amino-resins
3920.94.00.00.00 - - Of phenolic resins
3920.99 - - Of other plastics:
- - - Of condensation or rearrangement polymerisation products, whether or not chemically modified:
3920.99.21.00.00 - - - - Polyimide sheet and strip, uncoated, or coated or covered solely with plastic
3920.99.28.00.00 - - - - Other
- - - Of addition polymerisation products:
3920.99.52.00.00 - - - - Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm
3920.99.53.00.00 - - - - Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
3920.99.59.00.00 - - - - Other
- - - Other
3920.99.90.10.00 - - - - Of hardened proteins
3920.99.90.90.00 - - - - Other

39.21 Other plates, sheets, film, foil and strip, of plastics:
- Cellular:
3921.11.00.00.00 - - Of polymers of styrene
3921.12.00.00.00 - - Of polymers of vinyl chloride
3921.13 - - Of polyurethanes:
3921.13.10.00.00 - - - Flexible
3921.13.90.00.00 - - - Other
3921.14.00.00.00 - - Of regenerated cellulose
3921.19 - - Of other plastics
3921.19.00.10.00 - - - Of hardened proteins
3921.19.00.90.00 - - - Other
3921.90 - Other:
- - Of condensation or rearrangement polymerisation products, whether or not chemically modified:
3921.90.10.00.00 - - - Of polyesters
3921.90.30.00.00 - - - Of phenolic resins
- - - Of amino-resins:
- - - - Laminated:
3921.90.41.00.00 - - - - - High-pressure laminates with a decorative surface on one or both sides
3921.90.43.00.00 - - - - - Other
3921.90.49.00.00 - - - - Other
- - - Other
3921.90.55.00.11 - - - - Of polyamides
3921.90.55.00.12 - - - - Of Polyurethane
3921.90.55.00.19 - - - - Other
- - Of addition polymerisation products
3921.90.60.00.11 - - - Of Polyethylene
3921.90.60.00.12 - - - Of Polyvinyl chloride
3921.90.60.00.13 - - - Of polyprophylene
3921.90.60.00.19 - - - Other
- - Other
3921.90.90.10.00 - - - Of hardened proteins
3921.90.90.90.00 - - - Other

39.22 Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics:

3922.10 - Baths, shower-baths, sinks and washbasins
3922.10.00.00.11 - - Baths
3922.10.00.00.12 - - Shower-baths
3922.10.00.00.13 - - Lavatory Wash-basins
3922.10.00.00.14 - - Kitchen Wash-basins
3922.20.00.00.00 - Lavatory seats and covers
3922.90 - Other
3922.90.00.10.00 - - Water tanks (equipped or not)
- - Other
3922.90.00.90.11 - - - Bidets
3922.90.00.90.12 - - - Siphons (for waste water installation)
3922.90.00.90.19 - - - Other

39.23 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics:

3923.10.00.00.00 - Boxes, cases, crates and similar articles
- Sacks and bags (including cones):
3923.21 - - Of polymers of ethylene
3923.21.00.00.11 - - - Sacs for All Fluid and Liquid foods
3923.21.00.00.19 - - - Other
3923.29 - - Of other plastics:
- - - Of poly(vinyl chloride)
3923.29.10.00.11 - - - - Sacs for All Fluid and Liquid foods
3923.29.10.00.19 - - - - Other
- - - Other
3923.29.90.00.11 - - - - Sacs for All Fluid and Liquid foods
3923.29.90.00.19 - - - - Other
3923.30 - Carboys, bottles, flasks and similar articles:
- - Of a capacity not exceeding two litres
3923.30.10.00.11 - - - Containers for solid medicine shapes
3923.30.10.00.12 - - - Containers for semi-solid medicine shapes
3923.30.10.00.19 - - - Other
3923.30.90.00.00 - - Of a capacity exceeding two litres
3923.40 - Spools, cops, bobbins and similar supports:
- - Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 8523
3923.40.10.10.00 - - - Spools, reels and similar supports for photographic and cinematographic film or tapes
3923.40.10.90.00 - - - Other
- - Other
3923.40.90.00.11 - - - Spools and cassettes for printing strips
3923.40.90.00.19 - - - Other
3923.50 - Stoppers, lids, caps and other closures:
3923.50.10.00.00 - - Caps and capsules for bottles
3923.50.90.00.00 - - Other
3923.90.00.00.00 - Other

39.24 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics:

3924.10.00.00.00 - Tableware and kitchenware
3924.90 - Other
3924.90.00.00.11 - - Feeding bottle teat with nipple
3924.90.00.00.19 - - Other

39.25 Builders' ware of plastics, not elsewhere specified or included:

3925.10.00.00.00 - Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres
3925.20.00.00.00 - Doors, windows and their frames and thresholds for doors
3925.30 - Shutters, blinds (including venetian blinds) and similar articles and parts thereof
3925.30.00.00.11 - - Shutters
3925.30.00.00.12 - - Culverts
3925.30.00.00.19 - - Other
3925.90 - Other:
3925.90.10.00.00 - - Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
3925.90.20.00.00 - - Trunking, ducting and cable trays for electrical circuits
3925.90.80.00.00 - - Other

39.26 Other articles of plastics and articles of other materials of headings 3901 to 3914:

3926.10.00.00.00 - Office or school supplies
- Articles of apparel and clothing accessories (including gloves, mittens and mitts)
3926.20.00.00.11 - - Poly(vinyl chloride) gloves (household type)
3926.20.00.00.19 - - Other
3926.30.00.00.00 - Fittings for furniture, coachwork or the like
3926.40.00.00.00 - Statuettes and other ornamental articles
3926.90 - Other:
3926.90.50.00.00 - - Perforated buckets and similar articles used to filter water at the entrance to drains
- - Other:
3926.90.92.00.00 - - - Made from sheet
- - - Other
3926.90.97.10.00 - - - - Corsets, Balens, etc. for clothing articles and accessories
3926.90.97.20.00 - - - - Hand fan, handles and parts of handles
- - - - Other
3926.90.97.90.11 - - - - - Spoons used for medicine dosage
3926.90.97.90.12 - - - - - Contraceptives of polyurethanes
3926.90.97.90.13 - - - - - Imitation precious or semi-precious stones (mounted on a base or not)
3926.90.97.90.14 - - - - - Clamps
3926.90.97.90.18 - - - - - Other